Overmute - Yamaha Nexo NXAMP4X4 User Manual

NXES104 EXPANSION BOARD AND REMOTE CONTROL
error will be displayed here. If the unit is in standby, it will be also shown here.

(16) Overmute

The "Mute all" button acts as an "Overmute" button: When pressed, the four channels of
the unit will be muted, but the individual mute status of each channel is preserved. That is
why the "Mute all" button is called "Overmute"; it is just like a second layer of muting, as
you can see in the picture bellow.
Channel 1 Mute
Channel 2 Mute
Channel 3 Mute
Channel 4 Mute
If you are in the following situation: Some channels are individually muted and the Mute all
is ON, like on the picture bellow (gray channels are muted):
Channel 1 Mute
Channel 2 Mute
Channel 3 Mute
Channel 4 Mute
Now, if you press the "Channel 2 Mute" on the amplifier front panel or into ESmonitor, the
"Mute all" function will be copy back to the individual channel mute, except for the Channel
2 that you have just pressed:
Channel 1 Mute
Channel 2 Mute
Channel 3 Mute
Channel 4 Mute
Mute All
Mute All
Mute All
PAGE 72 OF 91