Notes; Location; Alias; Hardware And Firmware - Yamaha Nexo NXAMP4X4 User Manual

NXES104 EXPANSION BOARD AND REMOTE CONTROL

(17) Notes

In this textbox you can take some notes of your choice. The text is saved on the computer,
not on the NXAMP itself.

(18) Location

This textbox is foreseen to enter the physical location of the unit. The text is saved on the
computer not on the NXAMP itself.

(19) Alias

This is the alias of the NXAMP used to display the unit in the network list, tree or group on
the left of ESmonitor. By default the NXAMP will have an alias like this "NXAMP-XXXXXX",
where the last six characters is the end of the MAC address of the NXES104 board fitted
into the NXAMP.
The Alias is stored on the computer. It uses the MAC address of the NXES104 to identity a
specific unit. Changing the computer or the NXES104 will disturb the alias of the units.

(20) Hardware and Firmware

Here you check whereas the connected unit is an NXAMP4x1 or an NXAMP4x4 and what is
the firmware revision inside.

(21) Scene

Saving or recalling a scene can be done here pressing the Set button.
Select the Scene of your choice and then choose Save or Recall. The scene and there name
are saved into the NXAMP itself.
Warning: Switching from a scene to another one is immediate and does not ask for any
confirmation, even if the cabinet family is changed. Therefore take care when changing
scene under live conditions.
PAGE 73 OF 91