Analog Input Block; Control Block - Yamaha Nexo NXAMP4X4 User Manual

GENERAL DESCRIPTION
design ensures high efficiency and low noise. Moreover, because the two converters work
in opposite phase, some noise is cancelled; this is preferable for both sound quality and
EMC (Electro magnetic compatibility).

Analog Input block

After linking the two XLRs for each channel, the analog input block has an EMC filter and a
precision input buffer that will remove the common noise on the input signal. The
maximum level allowed for the input signal is + 28 dBu (55 Volts peak to peak). The pin
out of the input XLR is given bellow.

Control block

The control block contains several sub-block that are detailed bellow.
The plain lines show the audio or sense signal (sense are voltage or current signal
measured at the output of each amplifier). The dashed lines show the digital
communication signal among several block.
You can see the audio input on the left; there are four analog inputs (from input XLR)
named Analog A, Analog B and so on... and four digital inputs (Digital A, Digital B and so
on...) from the expansion slot. These eight signals can be patched inside the DSP to any
PAGE 28 OF 91