To Select The Address; To Select The Baud Rate 57600. (485 Interface Only); To Select The Communication Language Scpi. (485 Interface Only) - TDK-Lambda Z+ series User Manual

3.2.2 To Select the Address

1. Press REM button. The LED is illuminated. "Ad r" appears on Current display.
2. Press Current Encoder. Existing address mode appears on Current display.
3. Turn Current Encoder until desired address appears.
4. To select desired address press Current encoder.

3.2.3 To Select the Baud Rate 57600. (485 Interface only)

1. Press REM button. The LED is illuminated. "INtF" appears on Voltage display.
2. Turn Voltage Encoder until "baUd" message appears on Current display
3. Press Current Encoder. Existing Baud Rate appears on Current display.
4. Turn Current Encoder until "57600" appears.
5. To select desired Baud Rate press Current encoder.

3.2.4 To Select the Communication Language SCPI. (485 interface only)

1. Press REM button. The LED is illuminated. "INtF" appears on Voltage display.
2. Turn Voltage Encoder until "La nG" message appears on Current display
3. Press Current Encoder. Existing Language appears on Current display.
4. Turn Current Encoder until "SCPI" appears.
5. To select desired Language press Current encoder.
+
For more information refer to section 4 of Z series User Manual
6