TDK-Lambda Z+ series User Manual page 10

:PROTection
:LEVel <NR3>
:LEVel?
: LOW
:CLEar
:MODE <CRD>
:MODE?
CURRent
[:LEVel]
[:IMMediate]
:TRIGger <NR3>
:TRIGger?
:MODE <CRD>
:MODE?
MEASure
:CURRent[:DC]?
:VOLTage[:DC]?
:POWer[:DC]?
DISPlay
[:WINDow]:STAT <bool>
[:WINDow]:FLASh <bool>
INITate
[:IMMediate]
:CONTinuous <bool>
:CONTinuous?
:STATe <CRD>
:STATe?
:[LEVel] <NR3>
:[LEVel]?
[:AMPLitude] <NR3>
[:AMPLitude]?
Set OVP value
Set OVP value query
Set UVP or UVL mode
Set UVP or UVL mode query
Set UVP|UVL value
Set UVP|UVL value
Set arbitrary trigger control mode
Set arbitrary trigger control mode query
Set output Current
Set output Current query
Set current value for trigger pending
Set current value for trigger pending query
Select arbitrary trigger control mode
Select arbitrary trigger control mode query
Reads the measured output current.
Reads the measured output voltage.
Reads the measured output power.
Display ON/OFF
Display Flash ON/OFF
Enables the trigger subsystem.
Trigger system is continuously enabled/disabled
Trigger system is continuously enabled/disabled
9