LIP-6812 & LIP-6830
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of dial pad digits).
3.5.2.4 Backup Proxy Port
When a Backup Proxy is employed (refer to Section 3.5.2.3), the associated Port must be
defined for the Backup Proxy Port.
To assign the Backup Proxy Port:
1) Press the
Section
3.3
Lock/Unlock Configuration).
2) Press
button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press
button, or move cursor to 6.Backup Proxy Port using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Input the Backup Proxy Port for the LIP-6812/LIP-6830 using the dial pad.
Backup Proxy Port
5060
[
] [CLR ] [ OK ]
5) Press the [ OK ] Softkey to save your Configuration.
6) Press the
Changing the Backup Proxy Port requires a reboot of the LIP-6812/LIP-6830; when you
leave the menu, you will receive a Reboot notice.
3.5.2.5 Local UDP Port
The Local UDP Port defines the port, normally 5060, the LIP Phone will use to send and receive
SIP signalling packets. Particularly when behind a firewall, in some instances the normal port
may not be availabe and a different port can be defined.
To set the Local UDP Port:
1) Press the
Section
3.3
Lock/Unlock Configuration).
2) Press
button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press
button, or move cursor to 7.Local UDP Port using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Input the Backup Proxy Port for the LIP-6812/LIP-6830 using the dial pad.
button. If the LCD Menu is locked, use the unlock procedure (refer to
button to exit from the menu.
button. If the LCD Menu is locked, use the unlock procedure (refer to
34
Installer Guide
June, '07