LIP-6812 & LIP-6830
cadence5
jitterbuffer_min_delay
jitterbuffer_nom_delay
jitterbuffer_max_delay
condition
FWRD
forwarding_address
noanswer_time
dial_mode
pause_timer
inter_digit_timer
DIAL
dialplan
digitmap
digitmap_tone
digitmap_process
Six value time array (on off on off on off). Valid range is 0 to
30000 milliseconds.
Default is 500 0 0 0 0 0
(Optional) Ring cadence when ACD call in Alert Info header.
Six value time array (on off on off on off). Valid range is 0 to
30000 milliseconds.
Default is 1000 100 1000 2000 0 0
(Optional) Minimum jitter buffer delay time in milliseconds.
Valid values are 0 to 150.
Default is 30.
Note : Jitter buffer is used to control QoS. Using larger values
produce less packet loss as the LIP Phone will wait longer for
receipt of packets. However, large values may delay voice
packet processing. Smaller values may produce more packet
loss but quicker voice packet processing.
(Optional) Nominal jitter buffer delay time in milliseconds.
Valid values are 0 to 150.
Default is 60.
(Optional) Maximum jitter buffer delay time in milliseconds.
Valid values are 0 to 150.
Default is 120.
(Optional) Specifies the condition when the phone forwards a
call.
Valid values are as follows:
•
-1 — disabled (Disable forwarding feature)
•
0 — not-usage (Don't forward a call)
•
1— no-answer (Forward a call when the call is not
answered).
•
2 — busy (Forward a call when the phone is busy).
•
3 — no-answer & busy (Forward a call when the phone is
busy or the call is not answered).
•
4 — un-conditional (Always forward a call).
Default is 0 (not-usage).
(Optional) Specifies the address to forward a call.
Max 60 characters are available.
(Optional) Specifies the no-answer time, in seconds, for no-
answer condition forward.
Valid values are 1 to 30.
Default is 10.
(Optional) Specifies the default dial-mode.
Valid values are number, ip or url.
Default is number.
(Optional) Specifies the pause timer in seconds.
Valid values are 1 to 30.
Default is 3.
(Optional) Specifies the inter-digit timer in seconds.
Valid values are 1 to 30.
Default is 6.
(Optional) Specifies the dial plan type.
Valid values are digitmap or routing.
Default is routing.
(Optional) Specifies the digit map string.
Max 512 characters are available.
Default is "x.T|x+#".
(Optional) Specifies the digit map string for second dial tone.
Max 512 characters are available.
(Optional) Specifies the digit map string with truncation, pre
8
D-
Installer Guide
June, '07