LIP-6812 & LIP-6830
3) Enter the Line number or move cursor using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey to select a Line.
4) Press
button, or move cursor to 3.Display Name using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
5) Input the Display Name for the LIP-6812/LIP-6830 using the dial pad.
Enter Display Name
Richard
[
] [Mode] [ OK
6) Press the [ OK ] Softkey to save your Configuration.
7) Press the
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of dial pad digits).
3.5.1.4 Name
The Name is used in SIP headers as the User ID or account assigned in the Call Server. A
Name is required for proper operation and must match the User ID or account assigned in the
Call Server.
To enter a Name:
1) Press the
Section
3.3
Lock/Unlock Configuration).
2) Press
button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Enter the Line number or move cursor using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey to select Line.
4) Press
button, or move cursor to 4.Name using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey.
5) Input the Name for the LIP-6812/LIP-6830 using the dial pad.
Enter Name
Myline@1234
[
] [Mode] [ OK ]
6) Press [ OK ] Softkey to save your Configuration.
7) Press the
[1]
]
button to exit from the menu.
button. If the LCD Menu is locked, use the unlock procedure (refer to
[1]
button to exit from the menu.
25
Installer Guide
June, '07