LG LIP-6812 Installer's Manual page 118

LIP-6812 & LIP-6830
centralized_conference
conference_url
de_register
VOIP
max_line_num
line1_proxy_address ~
linen_proxy_address
line1_proxy_port ~
linen_proxy_port
line1_displayname ~
linen_displayname
line1_name ~
linen_name
line1_authname ~
linen_authname
line1_password ~
linen_password
(Optional) Specifies use of a centralized conference server
to process audio for the conference.
Valid values are enable/disable
Default is enable.
(Optional) Specifies the URI for the centralized conference
server.
Max 50 characters are available.
Default is Call Server.
When a line is registered, it normal de-registers prior to re-
geistering during the power or other boot cylce. In certaon
circumstances it may be preferred not to de-register.
Valid values are enable/disable
Default is enable
(Optional) The number of programmable buttons used for
SIP lines and features.
Valid values are as follows:
• LIP-6812 phone — 1 to 11
• LIP-6830 phone — 1 to 24
Default is 2.
Address of the SIP proxy servers that are used by the
phones. Enter the addresses in IP address or host name of
the proxy server. The n variable represents a phone line.
Note: The linen_proxy_address
linen_proxy_port parameter can be used to assign different
proxy addresses to different phone lines. The value of "n"
can be from 1 to value of max_line_num.
Port number of the SIP proxy server that will be used by
phone lines. The n variable represents a phone line.
Valid values are 1024 to 32000.
Default is 5060.
(Optional) Identification as it should appear for caller-
identification purposes.
jdoe@company.com appearing on phones that have caller
ID, you can specify User A in this parameter to have User A
appear on the called party display. If a value is not specified
for this parameter, nothing is used.
The n variable represents a phone line.
Max 50 characters are available.
SIP User ID, often Number or SIP address for use when
registering. Enter a number without dashes. For example,
enter 555-0100 as 5550100. Enter an SIP address without
the host name.
The n variable represents a phone line.
Max 50 characters are available.
(Optional) Name used by the phone for authentication if a
registration is challenged by the proxy server during
initialization. It is required only if a proxy server requires
authentication from phones.
The n variable represents a phone line.
Max 50 characters are available.
(Optional) Password used by the phone for authentication if
a registration is challenged by the proxy server during
initialization.
The n variable represents a phone line.
Max 50 characters are available.
5
D-
Installer Guide
parameter
For example, instead
June, '07
and the
of