Related Manuals for LG LIP-6804
Summary of Contents for LG LIP-6804
- Page 1 IP Telephone User Guide LIP-6804 SIP (Session Initiation Protocol) Nortel Please read this manual carefully before operating your set. Retain manual for future reference. LGN68041227SCUG-01.02 June...
-
Page 2: Revision History
Copyright Laws. LG-Nortel reserves the right to make changes in specifications at any time without notice. The information furnished by LG Nortel in this material is believed to be accurate and reliable, but is not warranted to be true in all cases. -
Page 3: Table Of Contents
Table of Contents 1. Introducing the LIP-6804..............1 1.1. LIP-6804 Overview .....................1 1.2. LIP-6804 Features....................1 1.3. LIP-6804 General Description ................2 2. Using Basic LIP-6804 Features ............4 2.1. Receiving a Call....................4 2.2. Making a Call......................4 2.3. Putting a Call on Hold..................5 2.4. -
Page 4: Introducing The Lip-6804
Service Provider’s network. Features and functions available to the LIP-6804 through the SIP Call Server are similar to those of a conventional business telephone. For ease of use, the LIP-6804 is equipped with fixed feature buttons, flexible (programmable) feature buttons, and a dial pad. -
Page 5: Lip-6804 General Description
The LIP-6804 interfaces with you to deliver voice and audio signals over the handset and speaker. The various buttons are the LIP-6804 input devices used to access resources and activate features. Location of the devices and buttons of the LIP-6804 are provided in Figures 1 and 2. - Page 6 OHD (On Hook Dial) button. Toggle the speaker state on and off. The button is red when the speaker is active. The LIP-6804 does not have a microphone, so it is a ‘listen-only’ device using the speaker. Hold button. Use to place a call on Hold. Also, use to access a held call.
-
Page 7: Using Basic Lip-6804 Features
Some buttons on the LIP-6804 represent Lines or SIP call appearances. The Line buttons present and manage calls to the specific Line or appearance. The LIP-6804 can support up to four (4) Lines, each associated with their own Line button. The LED of the Line button indicates... -
Page 8: Putting A Call On Hold
Transfer button. 2.5. 3-Party Conference The LIP-6804 3-Party Conference feature lets you speak with two other parties at once. To initiate a conference between the current party, you, and another party: 1) Press the Conference Flexible button, and dial the number you want to join in the conference. -
Page 9: Call Waiting-Multiple Call Appearance
If either of the called parties hangs up, the call will remain connected. 2.6. Call Waiting-Multiple Call Appearance Each Line configured on the LIP-6804 can have multiple call appearances; call activity appears at more than one Line button to facilitate call handling. This is very useful if the user is on one call and needs to act on another incoming call on the same Line. -
Page 10: Last Call Return
Guide for the steps to configure a Last Call Return button. 2.9. Speed Dial Buttons Programmable buttons on the LIP-6804 can be assigned for Speed Dial; pressing the button will automatically select your Line and dial the stored number (refer to the Installer Guide for the steps to configure Speed Dial). -
Page 11: Dnd (Do-Not-Disturb)
LIP-6804 User Guide 2.11. DND (Do-Not-Disturb) The DND (Do Not Disturb) feature places the LIP-6804 in a ‘no-ring’ state. If the LIP-6804 is in DND, an incoming call to your extension will not cause the phone to ring. To use this feature, the DND button must be assigned. -
Page 12: Madn Sca(Multiple Appearance Directory Number Single Call Appearance)
2.14. MADN SCA(Multiple Appearance Directory Number Single Call Appearance) The LIP-6804 can support up to 4 Lines, each associated with its own button. A Line button can be set up as a Private Line or, a Shared Line. A Private Line is used by only one phone. A Shared Line is shared by more than one phone and is for MADN SCA.