Registration Status; Line Type - LG LIP-6812 Installer's Manual

LIP-6812 & LIP-6830
4) Press button, or move cursor to 6.Auth. Password using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
5) Input the Authentication Password for the LIP-6812/LIP-6830 using the dial pad.
Enter Auth. Password [1]
*****
[ ] [Mode] [ OK ]
6) Press the [ OK ] Softkey to save your configuration.
7) Press the
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of dial pad digits).

3.5.1.7 Registration Status

The status of the Line registration with the SIP Call Server can be viewed. The status is
displayed as OK, NOK (Not OK) or Undefined (when no Call Server Address is assigned).
To view the Line registration status:
1) Press the
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Enter the Line number or move cursor using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey to select a Line.
4) Press button, or move cursor to 7.Reg. Status: using the [Next]/[Prev] Softkeys, to
check login status.
5) Press the

3.5.1.8 Line Type

Line buttons represent the SIP call appearance for a User ID or account. The LIP-6812/LIP-
6830 support three Line types:
Private Line
-
- Shared or Bridged Line
- Direct Station Selction (DSS)/ Busy Lamp Field (BLF) Call Coverage Line
It is intended the first two Line buttons be configured as the User's Line (Private or Shared);
these Lines are employed when automatic Line access is required, such as Speed Dial.
A Shared or Bridged Line appears at more than a single extension and status must be
requested from the server.
outgoing calls and the LEDs indicate the Line status.
button to exit from the menu.
button.
button to exit from the menu.
The Shared Line button accesses the Line for incoming and
27
Installer Guide
June, '07