Lcd Menu Configuration - LG LIP-6812 Installer's Manual

LIP-6812 & LIP-6830
3.

LCD Menu Configuration

This chapter provides detailed information to configure the LIP-6812 and LIP-6830 IP Phone
using the LCD for menu display and Softkeys and dial pad for inputs. To configure the IP phone
manually, it should be connected to the LAN and, if required, power cables as described in
Section 2.1. Before beginning configuration of the LIP Phone, as a minimum, you will need the
following information:
IP address scheme for the LIP Phone, Dynamic (DHCP) or Static.
-
For Static IP addressing you will need the:
-
o LIP Phone IP address
o Default gateway address
o Subnet Mask
o SIP Call server IP address
o Configuration (TFTP) server address
o SNTP server IP address
o DNS server IP address
o Proxy server IP address
Configuration with the LCD Menu employs the Menu tree structure shown in
Figure 3-2. To initiate a Configuration session, press the
first branch in the menu as shown in
digit associated with the branch or highlighted with the cursor and selected with the [ OK ]
Softkey, see Figure
data is entered from the dial pad and/or selected with the 3 Softkeys below the LCD.
Figure
3-2. When an individual paramter, such as Default Gateway, is reached
Configuration Menu
1.Network Configuration
2.SIP Configuration
3.Phone Settings
4.Call Preferences
5.Directory
6.Set to Default
7.Lock/Unlock Config
8.Information
9.Reboot
Figure 3-1 LIP-6812/LIP-6830 Configuration Menu
3-1. The next branch or entry is select using the
9
Installer Guide
Figure 3-1 and
button to access the
June, '07