Mounting Arrangement - WAGNER Fine Finish Stati-Kit 2000 0292003 Owner's Manual

TYPICAL MOUNTING
RANGEMENT
WAGNER AIRLESS SPRAYER
MOUNTING INSTRUCTIONS
1. Use the allen wrench provided, attach the mounting
bracket (1) to the power pack (2) with the 2.4mm
lockwashers (3) and socket head screws (4).
2. Place the power pack/mounting bracket assembly on
any 1" diameter tube, preferably as illustrated below.
3. Align support clamps (5) with mounting bracket (1),
using the other allen wrench provided, attach the 2
pieces with the 4-1/4" lockwashers (6) and socket
head screws (7), tightening down equally on both
sides.
AR-
1
Figure 3
2
5
6
7
9 1
3
4