WAGNER Fine Finish Stati-Kit 2000 0292003 Owner's Manual page 4

HAZARD
Electrostatic arcing may cause an explosion or fire.
Solvent and paint fumes can explode or ignite causing
property damage and/or severe injury.
Explosion or fire. Solvent and paint fumes can ex-
plode or ignite causing property damage and/or se-
vere injury.
WARNING
• Operator must be grounded. Grounding straps must be
used when wearing rubber soled shoes.
• Operator must be in contact with the spray gun handle;
cut out palm section of any work gloves to be used.
• Operator must remove all metal objects from his or her
person which are not grounded.
• The object being sprayed must be grounded.
• All metal objects within the spray area must be grounded
(including spray booth, part hangers, fire extinguishers,
etc.)
• Grounded conductive floor must be provided in spray
area.
• Turn off the Power Pack and unplug from outlet before
flushing out the gun, cleaning or replacing parts on the
gun such as changing tips.
• Exhaust and fresh air introduction must be provided to
keep the air within the spray area free of accumulation of
flammable vapors.
• Smoking must not be allowed in spray area.
• Fire extinguishing equipment must be present and in
working order.
• Electrostatic arcing must be prevented. (See Electro-
static arcing)
• When flushing the system use only solvents recom-
mended by the coatings manufacturer. Be sure Power
Pack is turned off and unplugged.
• Use only grounded high pressure fluid hose.
• Avoid all ignition sources such as static electrcity
sparks,open flames such as pilot lights, hot objects such
as cigarettes and sparks from connecting and discon-
necting power cords and working light switches.
4
1
PREVENTION