Cleaning the Meter
To avoid electrical shock or damage to the Meter, never allow water inside the
case. To avoid damaging the housing, never apply solvents to the Meter.
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
Dirt or moisture in the input terminals can distort meter readings. Clean the terminals as follows:
1. Turn the rotary switch to
2. Shake out any dirt that may be in the terminals.
3. Soak a new swab with alcohol. Clean each terminal with the swab.
WWarning
OFF
and remove the test leads from the terminals.
Cleaning the Meter
15