Psion Teklogix 7535 G2 User Manual page 313

D.1 USB Setup
The USB Setup application is used to update a Windows PC so that it can connect to
a Psion Teklogix 7535 G2 using the USB port on the Portable Docking Module
(PDM) connector. To download the USB Setup application, go to:
www.psionteklogix.com/downloads
This will take you to the Teknet home page.
• Login with your Teknet Username and Password. (If you're not already a
member of Teknet, you can register for free at this home page so that you
can access the USB Setup application.)
Once you've entered your name and password, the Download page is displayed.
• Scroll down to the Utilities heading, and then under USB Setup, tap on
Download. If you need further assistance, please contact Psion Teklogix
support (1-800-387-8898).
System Requirements
• Windows 2000 or XP.
• ActiveSync 3.5 or later.
The install program:
• updates copies of the device installation scripts
wceusbsh.inf
• sets up a USB connection between the PC and the 7535 G2.
D.1.1 Launching The Application
Before running the USB Setup application:
1. Unplug the 7535 G2 from your PC, and exit all running applications.
2. Double-click on the USB Setup executable in the directory you copied
it to.
with Psion Teklogix-specific information, and
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: USB Setup Application
and
usbstor.inf
USB Setup
D-3