Psion Teklogix 7535 G2 User Manual page 144

Chapter 5: Configuration
Manage Triggers
Important:
Double-Click
When a key is pressed and released, then pressed again within the configured time
(between 0 to 1000 milliseconds), a double-click occurs. See also "Trigger Type" on
page 114.
Show All
By default, the trigger mapping list only shows active mappings. Mappings for
drivers or applications that are not currently active are not normally displayed. By
checking this checkbox, all mappings, both active and inactive, are displayed.
Add
Tapping this button brings up the Add mapping dialog (see page 113), so that you
can add new trigger mappings.
Edit
Tapping this button brings up the Edit mapping dialog (see page 113), so that you
can edit existing trigger mappings.
Remove
Tapping this button removes an existing mapping.
OK
The OK button in the top right of the Manage Triggers screen saves all changes
made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all
changes made will be discarded.
112 Psion Teklogix 7535 G2 Hand-Held Computer User Manual
It is not possible to have two or more identical mappings—for
example [F1] cannot be mapped to the Non-Decoded Scanner
twice—even if the trigger type is different.
A keyboard key that is used as a trigger source will no longer gen-
erate key data, or perform its normal function. For example, if the
space button is used as a trigger source, it will not be able to send
space characters to applications.