Appendix E: Wireless Wide Area Network (WWAN)
Power Mode
Inbox or Outbox. In this way messages intended for another application running on
the same device can be hidden from the user, as long as those messages begin with
the string configured here.
E.2 Power Mode
The power mode of the modem is controlled through the Power menu in the Control
Panel (not through the Wireless WAN user interface).
For CF Card modems, the settings are found under the Devices tab. If the checkbox
for a modem is unchecked then no power is applied to the modem and no driver is
loaded (neither the serial port driver nor the Wireless WAN driver). If the checkbox
is checked then power is applied to the modem and the drivers are loaded when the
computer is turned on. Power is removed from the modem when the computer
enters suspend mode.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual E-17