Psion Teklogix 7535 G2 User Manual page 123

• In the Display Properties dialog box, open the Backlight tab.
Notes: Backlight changes take effect immediately. You do not need to reset the unit.
To maximize battery run time, keep the display backlight brightness and
active durations as low as possible.
ON Threshold
The 7535 G2 is equipped with an ambient light sensor. This sliding bar allows you
to determine how dark the ambient light needs to be before the backlight turns on.
Intensity
This parameter is used to adjust the light intensity of the 7535 G2 backlight. Sliding the
bar to the left lowers the light intensity, and sliding it to the right raises the intensity.
Bright For
The value chosen from this dropdown menu determines the duration of time that the
backlight stays on at the configured intensity after the last user action (keypress,
scan trigger).
Dim For
The value chosen from this dropdown menu determines the duration of time that the
backlight stays on at half the configured intensity (dimmed backlight) after
Figure 5.4 Display Backlight Properties
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Display Properties
91