Chapter 6: Peripheral Devices & Accessories; External Bar Code Readers; Powerscan® Standard, Lr And Xlr Bar Code Scanners; Entering Data With The Bar Code Reader - Psion Teklogix 7535 G2 User Manual

6.1 External Bar Code Readers

6.1.1 PowerScan® Standard, LR and XLR Bar Code Scanners
Note: Refer to "PowerScan® Standard Range Scanner Specs" on page 254 and
"PowerScan® LR and XLR Industrial Scanner Specs" on page 252 for
detailed specifications.
The 7535 G2 supports Psion Teklogix' PowerScan
standard, long range and extra long range options.
To connect this scanner to the 7535 G2, attach the device to the tether port at the
upper-right side of the 7535 G2. Before using the bar code reader, you may need to
change some parameters (see "Non-Decoded Scanners" on page 144). Review your
"Power Scan Programing Guide (PSC)" for details.

6.1.2 Entering Data With The Bar Code Reader

Note: For helpful scanning tips, refer to "Scanning Techniques" on page 51.
For external non-decoding scanners, when a label is scanned successfully, the
7535 G2 will beep if configured appropriately and the scan LED will flash. (Most
external decoding scanners have their own indicators—some communicate with the
unit.) Occasionally, the bar code labels are poorly printed or damaged and cannot be
read properly. In this case, use the keyboard to enter data from the label.

6.2 RD7950 Integrated UHF RFID Reader

Note: Refer to Appendix B: RD7950 Integrated UHF RFID Reader for detailed
information and specifications.
The RD7950 UHF RFID Reader is an EPC-compliant RFID reader available for
Psion Teklogix rugged hand-held computing devices. The RD7950 can be
retrofitted to deployed Psion Teklogix products. Multimedia data capture
capabilities are delivered by combining RFID with existing technologies such as
laser bar code scanning or imaging.
Chapter 6: Peripheral Devices & Accessories
®
industrial bar code scanner with
Psion Teklogix 7535 G2 Hand-Held Computer User Manual

External Bar Code Readers

213