Pdf-417; Micro Pdf-417 - Psion Teklogix 7535 G2 User Manual

Set Length L1 And Set Length L2
Lengths for "Discrete 2 of 5" can be set for Any length, Length within a range,
One discrete length or Two discrete lengths. The length of a code refers to the
number of characters (i.e., human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths
where you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a
selected length. Choosing Two discrete lengths allows you to decode only those
codes containing two selected lengths. Length within a range allows you to decode
a code type within a specified range from 1 to 12.
Field Size/Chars
Refer to page 147 for details.
5.11.3.17 2D PDF-417
Enabled
Setting this parameter to ON enables PDF-417 two dimensional (2D) coding.
Field Size/Chars
Refer to page 147 for details.
5.11.3.18 2D Micro PDF-417
Enabled
Setting this parameter to ON enables "2D Micro PDF-417" bar code scanning.
Micro PDF-417 is a multi-row symbology that is useful for applications requiring
greater area efficiency but lower data capacity than PDF-417.
Code 128 Emulation
When this parameter is enabled, the scanner transmits data from certain Micro
PDF-417 symbols as if it was encoded in Code 128 symbols.
If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are
transmitted with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Decoded (Internal) Scanners
2D PDF-417
169