Changing Network Properties; Checking The Scanner; Using Microsoft® Activesync - Psion Teklogix 7535 G2 User Manual

2.4.3.3

Changing Network Properties

To change the properties of an existing preferred network:
• Highlight the network that you want to modify.
• Tap on the Properties button.
• Make any necessary changes in the Wireless Properties dialog box, and
press [ENTER] to save the changes.

2.5 Checking The Scanner

Note: Details about operating and troubleshooting scanners and RFID readers
are provided under the heading "Internal Scanners" on page 50.
If your 7535 G2 is equipped with an internal scanner, you can test it to ensure that it is
operating properly. Point the scanner window at a bar code that your scanner was
designed to decode—for example, a 1D UPC bar code or 2D bar code. Press the
SCAN button or pistol trigger, and check for a valid decode on the hand-held's screen.
Performance is improved if you disable all unneeded bar codes in the Bar Codes
screen. Review "Scanner Settings" on page 142 for details about bar codes.
2.6 Using Microsoft® ActiveSync®
®
ActiveSync —Microsoft PC connectivity software—can be used to connect the
hand-held to PCs running this software.
Note: Keep in mind that you'll need to run the USB Setup program to configure
your workstation before connecting the 7535 G2 via USB. For information
about the USB application, refer to Appendix D: USB Setup Application.
By connecting the 7535 G2 to a PC with a cable and running ActiveSync on the PC,
you can:
• View 7535 G2 files from Windows Explorer.
• Drag and drop files between the 7535 G2 and the PC in the same way that
you would between PC drives.
• Back up 7535 G2 files to the PC, then restore them from the PC to the hand-
held again, if needed, and so on.
To install ActiveSync, follow the step-by-step instructions provided with the
program's setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/addons/default.mspx
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout

Changing Network Properties

27