Trigger Connectors; Cleaning And Maintenance - Lyngdorf Audio SDAI 2175 Owner's Manual

Semi digital amplifier integrated

Hide thumbs Also See for SDAI 2175:

Table of Contents

Trigger connectors

The SDAI 2175 is equipped with a TRIGGER OUT 3.5mm mono jack connector. The Trigger signal is a

12V short circuit protected output signal for powering up external equipment when the SDAI 2175 is on,

e.g. remotely connected SDAI 2175 power ampliﬁ ers or active subwoofers.

Always unplug the unit from the electrical outlet before cleaning.

This unit does not require any regular maintenance except to keep its exterior clean. Simply wipe its exte-

rior with a clean soft cloth. A small amount of non-abrasive cleaner may be used on the cloth to remove

any excessive dirt or ﬁ ngerprints. Do not use abrasive cleaners or cleaners containing liquid solvents.

Table of Contents