Set Channel Quality And Assign Inputs To Channels (4D) - Bosch Integrus Operation Manual

54 en | Configuration
7.2.5

Set channel quality and assign inputs to channels (4D)

The audio quality of the channels (mono/stereo, standard/premium) can be set in sub-menu
4D. The quality can be set the same for all channels or for each channel separately. Note that
choosing stereo and/or premium quality uses more bandwidth and decreases the number of
available channels (see section Carriers and channels, page 22). In stereo mode, the left signal
is always an even numbered input. The next higher input number is used for the right signal.
When the quality is set the same for all channels with the 'All Mono' or 'All Stereo' options, the
inputs are assigned automatically to the channels as indicated in the table below:
All Mono
Channel
00
01
...
31
With menu option 4D (Per Channel Settings), the assignment can also be done for each
channel separately.
Menu Item
4D Ch. Quality
If, in the network mode, stereo quality is selected, the floor language is assigned to the left
channel and the translation is assigned to the right channel. This can be used for language
learning applications.
Menu Item
4D Channel nn
2013.11 | V1.4 |
All Stereo
Input Channel
00 00
01 01
... ...
31 15
Options
Quality:
* All Mono SQ
All Mono PQ
All Stereo SQ
All Stereo PQ
Per Channel . . .
Options
Channel nr.:
00 ... 31
Quality:
- Disabled
* - Mono SQ
- Mono PQ
- Stereo SQ
Operation manual
Language Distribution System
input L
00
02
...
30
Description
Set all channels to mono, standard quality.
Set all channels to mono, premium quality.
Set all channels to stereo, standard quality
Set all channels to stereo, premium quality.
Select this option to go to the 'Per Channel
Settings' menu.
Description
Select which channel to configure.
Disable selected channel.
Set selected channel to mono, standard
quality.
Set selected channel to mono, premium
quality.
Set selected channel to stereo, standard
quality.
Input R
01
03
...
31
Bosch Security Systems B.V.