Integrus Charging Units - Bosch Integrus Operation Manual

Language Distribution System
5.5

Integrus Charging Units

Mount charging cabinet on a wall
LBB 4560/50 is suitable for either table-top or wall-mounted use.
It can be wall-mounted using 5 mm (0.19 inch) screws, with a head diameter of 9 mm
(0.35 inch). The screws and plugs delivered with the LBB 4560/50 are designed to mount the
unit on a solid brick or concrete wall. Two holes, 8 mm in diameter and 55 mm in depth, must
be drilled 500 mm apart (see the next figure).
Warning!
!
To comply with UL and CSA regulations, the charging cabinets must be mounted in such a
way that they can be easily removed by hand in case of emergency.
Figure 5.12: Charging cabinet mounting dimensions
Bosch Security Systems B.V. Operation manual
Installation | en 41
2013.11 | V1.4 |