Testing; Integrus Transmitter - Bosch Integrus Operation Manual

66 en | Testing
8

Testing

8.1

Integrus Transmitter

The Monitoring sub-menu (2) on the transmitter is used to set which signal is sent to the
monitoring headphone output. It can be one of the inputs, one of the channels or no signal,
see also section Set transmission (4A), page 52.
Use the monitoring headphone of the transmitter to check the input audio signal in the
transmitter, before it is sent to the receivers.
When the sensitivity of one of the inputs is being changed in the Setup menu (4I, 4J or 4K), or
when assigning inputs to channels (menu 4D, Per Channel), the monitoring output
automatically switches temporarily to that source, even when the option 'None' has been
chosen. When the headphone output is disabled (see section Enable / disable headphone
output (4N), page 58), the output level can not be changed and the level indicator is not
visible.
Menu Item Option
2A Source/
Volume
The 'Source/volume' screen also displays level meters (two for a stereo source, one for a
mono source) for a visual indication of the actual signal strength:
= low level, = high level,
2013.11 | V1.4 |
Value 1
Source:
- In. nn Input nr:
00 ... 31
- Ch. nn Channel nr:
00 ...31
- Aux.L
Aux.R
- None
= overflow.
Operation manual
Value 2 Description
Volume: The signal from audio input nn is
-31 ... 0 dB available on the monitoring headphone
output.
Volume: The signal on channel nn is available on
-31 ... 0 dB the monitoring headphone output.
Volume: The signal on the Aux. Left input is
-31 ... 0 dB available on the monitoring headphone
output.
Volume: The signal on the Aux. Right input is
-31 ... 0 dB available on the monitoring headphone
output.
Volume: The monitoring headphone output is
-31 ... 0 dB switched off during normal operation,
but is active when the sensitivity of one
of the inputs is being changed.
Language Distribution System
Bosch Security Systems B.V.