Route A Source; Room Mode - Crestron Adagio AMS Operation Manual

Media System
Select a Room
Control a Room
92 • Media System: Adagio AMS
Search
Select the desired letter
SOURCE
to jump to that point in the list.
ROOM
HOUSE
MENU
⇒ Select a letter with the selection knob and press the ENTER
button.

Route a Source

Rooms that are connected to the source are indicated on the room buttons.
•
Select a source as described on page 69.
•
Press room buttons on the AMS or AAE to route the selected source to a
room.
NOTE: Volume adjustment is not available when the AMS is in Source mode.
When a source is routed to a room that is not already on, the room will be turned on
at the startup volume specified on page 60.

Room Mode

Room mode is used to select and control a room that is connected to the AMS. If a
room button LED is on, then the room is connected to an audio source. If a room
button LED is off, then the room is turned off.
To select a room:
•
Press Room to put the AMS in the Room mode. The current selected room
is displayed on the LCD.
Room Mode
SOURCE
ROOM
HOUSE
MENU
Control
•
Turn the selection knob until the desired room is displayed on the LCD.
Alternatively, press a room button on the AMS or AAE (if connected).
After a room is selected, a source can be selected, the room can be turned "off",
room and global volume can be adjusted, or the room output can be muted.
•
To select a source:
⇒ Press the soft button labeled Source.
Crestron Adagio
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
Room 1
S1 AM/FM
Source Global Off
Operations Guide – DOC. 6509B
®
AMS
SURRND
THEATER
DISPLAY
MORE
SURRND
THEATER
DISPLAY
MORE