Using Your Auria T-Coil; Figure 33. Aligning The T-Coil On The Harmony Processor; Figure 34. T-Coil Snapped Correctly Into Place - Advanced Bionics HARMONY User Manual

Using your Auria T-Coil:

To attach the T-Coil to your Direct Connect Earhook:
• Align the Auria T-Coil as shown.
Figure 33: Aligning the T-Coil on the Harmony Processor.
• Gently push the T-Coil onto the Direct Connect Earhook until it lightly snaps
in place.
Figure 34: T-Coil Snapped Correctly Into Place.
For your T-Coil to be effective, you must have access to a looped system or a hearing-
aid–compatible telephone. This will allow your T-Coil to receive the electromagnetic
fi eld generated by these devices. If you are attempting to use your T-Coil with a
noncompatible audio device, you may hear no sound or a low-level humming or
buzzing noise.
To optimize reception with your T-Coil, rotate the T-Coil 90 degrees to the left or to
the right.
User Guide for the Auria Harmony Sound Processor 41