Assembling The Powercel Charger; Figure 10. Charger On A Flat Surface - Advanced Bionics HARMONY User Manual

NOTE: Do not force the PowerCel onto the processor. The PowerCel is designed
to be inserted in only one direction; applying force may damage your
equipment.
You may fi nd it easier to remove the Accent Color Cover fi rst before
connecting/removing the PowerCel.
If using the T-Mic, turn it gently in either direction prior to removing your
PowerCel. This will prevent any damage to the T-Mic.

Assembling the PowerCel Charger

CAUTION: Only use the Charger provided for charging AB PowerCels. DO NOT
use it to charge other batteries. Do not try to charge Auria PowerCels
using a charger other than the one supplied by AB.
WARNING: Power supplies and battery chargers should be operated in an open
area to ensure adequate airfl ow. While no injury cases have resulted,
during normal use or a fault condition, components may become
hot. If the device's temperature results in discomfort or pain when
touched, disconnect the power source and contact AB.
The charging system consists of the charger, power supply and power adapters.
PowerCels are custom lithium ion rechargeable batteries.
• Place the charger on a fl at surface near an electrical outlet.
Figure 10: Charger on a Flat Surface.
User Guide for the Auria Harmony Sound Processor 13