Connecting The Headpiece To The Harmony Processor; Removing The Headpiece From The Harmony Processor; Connecting Earhooks; Figure 5. Connecting And Removing The Headpiece - Advanced Bionics HARMONY User Manual

Connecting the Headpiece to the Harmony Processor

• Align the raised area on the end of the cable with the groove on the headpiece
cable connection port located below the program switch on the body of the
processor.
• Slide in place until secure.
Figure 5: Connecting and Removing the Headpiece.

Removing the Headpiece from the Harmony Processor

• Hold the cable's connector (the plastic plug, not the wire) and gently pull it away
from the Harmony Processor.

Connecting Earhooks

• Align the earhook fl ush with your processor.
• Hold the earhook at the base and push to snap in place.
• Gently pull back to confi rm that the earhook is secure.
Figure 6: Connecting an Earhook.
10 User Guide for the Auria Harmony Sound Processor