Auria Direct Connect Earhook; Direct Connect Cable; To Connect The Direct Connect Cable; Figure 20. Direct Connect Cable - Advanced Bionics HARMONY User Manual

Auria Direct Connect Earhook

The Direct Connect Earhook allows you to connect to a variety of audio devices.
To connect, you will also need the Direct Connect Cable and an Audio Interface
Cable. Your Direct Connect Earhook can also function as a standard earhook when
programmed appropriately by your audiologist.

Direct Connect Cable

The Direct Connect Cable attaches to the Direct Connect Earhook and is typically
used in conjunction with the Audio Interface Cable. The Direct Connect Cable is
available in three different lengths. The auxiliary jack on the cable is 3.5 mm in size
and is designed for stereo or mono input. Connect the adapter (included) to the
Direct Connect Cable before connecting a device with a mono output, such as an
AM radio, to the Direct Connect Cable.

To Connect the Direct Connect Cable:

• Remove the processor from your ear.
• Hold the Direct Connect Earhook or base of the processor.
• Gently push the Direct Connect Cable into the port at the top of the earhook.
Figure 20: Direct Connect Cable
An alternate method for attaching the Direct Connect Cable to the Direct Connect
Earhook:
• Rotate the connector 180 degrees.
• Approach the Direct Connect at an angle.
• Snap into place.
• Rotate the connector 180 degrees to align.
User Guide for the Auria Harmony Sound Processor 27