Part 2: Powering Your Harmony Processor; The Auria Powercel Battery Option; Connecting The Powercel Battery; Figure 9. Connecting The Powercel - Advanced Bionics HARMONY User Manual

Sound processor hiresolution bionic ear system

Hide thumbs Also See for HARMONY:

Table of Contents

Part 2: Powering Your Harmony Processor

WARNING: Power supplies and battery chargers should be operated in an open

area to ensure adequate airﬂ ow. While no injury cases have resulted, components

may become hot during normal use or a fault condition. If the device's temperature

results in discomfort or pain when touched, disconnect the power source and contact

your local AB representative.

The PowerCel is used to power your processor. If you select this option, the entire unit

will sit behind your ear.

The tracks located along the PowerCel and processor direct the PowerCel into place

making it easy to use. To connect a PowerCel:

• Guide the PowerCel onto the tracks on the bottom of the processor.

• Slide the PowerCel onto the processor until it stops. The PowerCel and

processor should be aligned.

• To remove, simply slide the PowerCel off while gently holding the processor and

accent color cover (if applicable).

Figure 9: Connecting the PowerCel.

12 User Guide for the Auria Harmony Sound Processor

Table of Contents

Auria harmony