To Disconnect The Direct Connect Cable; Audio Interface Cable; Figure 21. Connecting/Disconnecting The Direct Connect Cable To The Direct Connect Earhook; Figure 22. Audio Interface Cable (Stereo) - Advanced Bionics HARMONY User Manual

To Disconnect the Direct Connect Cable:

• Remove the processor from your ear.
• Hold the Direct Connect Earhook or base of the processor.
• Hold the Direct Connect Cable at the connector.
• Gently pull the Direct Connect Cable away from the port at the top of the
earhook.
Figure 21: Connecting/Disconnecting the Direct Connect Cable to the Direct
Connect Earhook.

Audio Interface Cable

WARNING: This cable should only be used with battery-operated devices.
Devices powered by direct AC current (i.e., devices that are plugged
directly into a wall outlet) require an interface cable with appropriate
safety protection.
• The Audio Interface Cable provides an interface between the Direct Connect
Cable and the audio device. This cable incorporates 3.5 mm stereo plugs that
are designed to work with external audio devices.
Figure 22: Audio Interface Cable (stereo).
28 User Guide for the Auria Harmony Sound Processor