Part 4: Hearing With Your Harmony Processor; Audio Mixing; Earhooks; Auria Standard Earhook - Advanced Bionics HARMONY User Manual

Part 4: Hearing with Your Harmony Processor

Audio Mixing

Audio mixing refers to the amplifi cation ratio between your processor built-in
microphone and any audio device connected to the processor post (this includes the
T-Mic as well). Audio mixing allows your processor microphone to pick up nearby
external sounds when connected to an audio device. This is important if you want
to hear your voice or other sounds in the environment when connected to an audio
device. Audio mixing is set by your audiologist during programming. A variety of
audio options are available to meet your listening needs.

Earhooks

Auria Standard Earhook

When using the Standard Earhook, the built-in microphone located at the top of the
processor is the primary source for capturing sound.
Auria T-Mic® Microphone
The T-Mic Microphone is an integrated earhook and microphone combination. The
microphone is omni-directional (accepts sound from all directions) and is designed
to fi t in the open bowl portion of your ear. The T-Mic is appropriate for everyday use
and may provide improved benefi t in diffi cult listening situations, such as in noisy
environments or on the phone.
NOTE: When fi tting the T-Mic over your ear, bend by placing fi nger near the
microphone and pushing gently. Avoid sharp angles (90°or greater) as
they can shorten the lifespan of the T-Mic. Keep the T-Mic clean and
dry. Dust, dirt, and excessive moisture could cause premature failure of
the T-Mic.
Figure 19: T-Mic.
26 User Guide for the Auria Harmony Sound Processor