Power Button - Advantech TPC-1260H User Manual

Figure 2.4: Pin Assignments on the Power Receptor and Power Button
• Step 4: Plug the power lines into the system power receptor.
• Step 5: Push the power button to power on the system as shown in fig-
ure 2.4.
• Step 6: Calibrate the touchscreen. Please go to "Start", "Pro-
grams",‡"PenMount DMC9000 Utilities"->"Control Panel" as shown
in figure 2.5. Then, click the tab "Calibrate" to calibrate by selecting
standard calibration or advanced calibration.
Note
TPC-1260H User Manual
This calibration is for Windows 2000. If your
operating system is Windows CE .NET, the
detailed procedure is described in section 4.1.4.
12