4.2.2 Network via Serial Port
This section introduces how to build the connection between a TPC prod-
uct and a host PC via Microsoft ActiveSync.
ActiveSync Setting Procedure
1. Insert the TPC CD into the CD-ROM drive of the host PC.
2. Install the TPC software development kit for eVC++.
3. Install Microsoft ActiveSync.
4. Connect the host computer and TPC with a null modem cable (included
in the package). Make sure the connection is solid on both RS-232 serial
ports.
5. Setup the communication environment of the TPC and the host
Setup the Communication Environment of TPC
1. Press "Start"->"Setting"->"Control Panel" and "PC Connection"
Figure 4.31: Set PC Connections
2. Select your network communication. For example, change the network
communication to "Serial1".
Figure 4.32: Change Connection
35
Chapter 4