Related Manuals for Advantech TPC-1770
Summary of Contents for Advantech TPC-1770
-
Page 1: User Manual
TPC-1770/1780 Intel Touch Panel Computer with High Luminance 17" SXGA TFT LCD User Manual... - Page 2 No part of this man- ual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reli- able.
- Page 3 Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or...
-
Page 4: Declaration Of Conformity
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. - Page 5 Safety Instructions Read these safety instructions carefully. Keep this User's Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for clean- ing. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
- Page 6 The sound pressure level at the operator's position according to IEC 704- 1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. TPC-1770/1780 User Manual...
-
Page 7: Table Of Contents
Figure 2.2:Power connector ......... 10 Figure 2.3:Power Receptor .......... 11 Figure 2.4:Power Button ..........11 Chapter 3 I/O Connector & Setting Mode ....14 TPC-1770 ................ 14 3.1.1 CN1 (COM3, COM4), CN2A (COM1) ....... 16 3.1.2 TPC-1780 ..............17 3.1.3 COM1,COM3,COM4 : Serial port RS232 .... - Page 8 Figure B.3:Installing the HDD ........45 Figure B.4:Pasting the Mylar ........45 Figure B.5:Attaching the HDD ........46 Appendix C Fuse Specifications ........48 Fuse Specifications............48 Fuse Replacement ............48 Figure C.1:Fuse Replacement ........48 TPC-1770/1780 User Manual viii...
- Page 9 General Information Sections include: • Introduction • Specifications • LCD Specifications • Touchscreen Specifications • Power • I/O Ports Arrangement • Panel Mounting • Dimensions & Cutout...
-
Page 10: Chapter 1 General Information
The TPC-1770/1780 provides powerful IO interface for easily communi- cating with other devices. The IO interface includes serial ports, Ethernet and USB 2.0 support. Embedded Windows Support: In addition to the OS support of Windows XP, Advantech offers platform support for XP embedded. 1.2 Specifications 1.2.1 System Kernel... -
Page 11: I/O Ports
1.2.2 I/O Ports Item TPC-1770H TPC-1780H 10/100/1000 Base-T x 2, 10/100/1000 Base-T x 2, I/O port (Realtek RTK8111B) (Realtek RTK8111B) RS-232 x 3 (COM1, RS-232 x 3 (COM1, COM3, COM4) COM3, COM4) VGA x 1 VGA x 1 USB 2.0 x 4 USB 2.0 x 4 PS/2 Mouse interface x 1 PS/2 Mouse interface x 1 PS/2 Keyboard interface... -
Page 12: Lcd Specifications
50,000 hours Backlight Life Time Note There might be several bright or dark pixels on the LCD. This comes from the production of the LCD. Such phenomenon is claimed to be normal accord- ing to the LCD manufacturers. TPC-1770/1780 User Manual... -
Page 13: Touchscreen Specifications
1.4 Touchscreen Specifications Resistive Touchscreen Type Tempered Glass Base Glass Construction 1024 x 1024 Resolution 80% typical Light Transmission USB Interface Controller 3.3 to 5V Power Rating 1 million touches Durability 1.5 Power Input voltage: 18 ~ 32 Vdc, 5.55-3.12A Max (the fuse will be open circuit as input level exceeds 33Vdc) Chapter 1... -
Page 14: I/O Port Arrangement
1.6 I/O Port Arrangement The arrangement of the I/O ports is shown in Figure 1.1. Figure 1.1: I/O Port Arrangement TPC-1770/1780 User Manual... -
Page 15: Panel Mounting
Make sure the waterproof gasket is in position before installing the TPC-1770/1780 to the panel opening. 2. Install the TPC-1770/1780 to the panel opening. 3. Find out the ten clampers and ten long screws in the accessory pack. Hook those clampers to those holes around the four sides of the bezel. -
Page 16: Dimensions & Cutout
1.8 Dimensions & Cutout Weight: 8 Kg (without HDD) Dimensions: 414 x 347.5 x 93 mm (16.3" x 13.68" x 3.66") (WxHxD) Cutout: 400.8 x 334.3 mm (suggested) Figure 1.3: Dimensions TPC-1770/1780 User Manual... - Page 17 System Setup...
-
Page 18: Chapter 2 System Setup
Chapter 2 System Setup This chapter provides a brief explanation for operating the TPC-1770/ 1780. It is easy to make the TPC-1770/1780 start working with the below step-by-step. Step 1: Unpack the TPC-1770/1780 package. Please check the packing list at the beginning of this manual. -
Page 19: Figure 2.3:Power Receptor
Figure 2.3: Power Receptor Step 4: Plug the power lines to the system power receptor. Step 5: Push the power button to power on the system as the figure 2.4. Figure 2.4: Power Button Chapter 2... - Page 20 TPC-1770/1780 User Manual...
- Page 21 I/O Connectors & Setting Mode...
-
Page 22: Chapter 3 I/O Connector & Setting Mode
Chapter 3 I/O Connector & Setting Mode 3.1 TPC-1770 TPC-1770/1780 User Manual... - Page 23 COM3 RS-232 COM 3 CN1A COM4 RS-232 COM4 CN1B COM1 RS-232 COM1 CN2A VGA port Connector to VGA output CN2B Audio Jack Connector to Audio PS/2 KB/MS PS/2 connector for KB/MS LAN1 RTL8111B CN5A USB1, USB2 USB port CN5B, CN5C LAN2 RTL8111B CN6A...
-
Page 24: Cn1 (Com3, Com4), Cn2A (Com1)
3.1.1 CN1 (COM3, COM4), CN2A (COM1) Serial Port RS232 Connector Definitions RS-232 NDCD NDTR NDSR NRTS NCTS TPC-1770/1780 User Manual... -
Page 25: Tpc-1780
3.1.2 TPC-1780 CN15 CN2 CN21 CN12 CN18 CN20 CN19 CN16 CN11 II I ICH7M-DH 945GME CN13 CN14 CN17 CN10 CN10 Chapter 3... - Page 26 SATA2 Primary IDE, Slave LVDS PWR Select For 5V Panel: 1-2 (default) , For 3.3V panel: 2-3 CLEAR CMOS Normal: open (default) , Clear CMOS: short BATTERY Verify Normal: 1-2 (default) , just for battery current measure TPC-1770/1780 User Manual...
-
Page 27: Com1,Com3,Com4 : Serial Port Rs232
LVDS PANEL Sel. 1024 * 768 24bit 1280 * 1024 48bit (Default) 800 * 600 24bit 1600*1200 48bit VGA only 3.1.3 COM1,COM3,COM4 : Serial port RS232 Connector Definitions Signal NDCD NDTR NDSR NRTS NCTS Chapter 3... - Page 28 TPC-1770/1780 User Manual...
- Page 29 Software Configuration Sections include: • Utilities & Drivers...
-
Page 30: Chapter 4 Software Configuration
Chapter 4 Software Configuration A support CD-ROM for TPC-1770/1780 is available and along with the product. There are related utilities and drivers for TPC-1770/1780 included. Please install the Chipset INF driver, VGA graphics driver, LAN driver, audio driver, Advantech.com driver, Touchscreen driver and Watchdog Timer (WDT) driver sequentially. -
Page 31: Lan Driver
4.1.3 LAN Driver Path: \TPC-1770H\XP\LAN\ \TPC-1780H\XP\LAN\ \TPC-1780H\VISTA32\LAN\ \TPC-1780H\VISTA64\LAN\ Available for the OS’s below: • Microsoft Windows XP • Microsoft Vista 4.1.4 Touchscreen Driver Path: \TPC-1770H\XP\TouchScreen\ \TPC-1780H\XP\TouchScreen\ \TPC-1780H\VISTA32\TouchScreen\ \TPC-1780H\VISTA64\TouchScreen\ Available for the OS’s below: • Microsoft Windows XP • Microsoft Vista 4.1.5 Audio Driver Path: \TPC-1770H\XP\Audio\ \TPC-1780H\XP\Audio\... - Page 32 TPC-1770/1780 User Manual...
- Page 33 Windows XP Embedded Sections include: • EWF • HORM • Advantech Utilities...
-
Page 34: Chapter 5 Windows Xp Embedded
Chapter 5 Windows XP Embedded TPC-1770/1780 is in support of embedded windows platform. This sec- tion is to state the important features, EWF and HORN, provided in win- dows XP embedded. 5.1 EWF EWF stands for Enhanced Write Filter. It provides an upper filter in the storage device driver stack that redirects disk write operations to volatile (RAM) or non-volatile (disk) storage. -
Page 35: Advantech Utilities
5.3.2 EWF Enable and Disable The two utilities assist users to enable or disable EWF. Please go to Start Menu-> All Programs-> Advantech. The default setting of EWF is dis- abled. Users can protect C partition from any disk writing via OSLock that is to enable EWF RAM REG Mode. -
Page 36: Horm
5.3.3 HORM This is to create HORM environment. Please go to Start Menu-> All Pro- grams-> Advantech. This utility firstly dismounts all local physical vol- umes that are not protected by EWF. It requires users to input the volume list. - Page 37 Watchdog Timer Programming...
-
Page 38: A.1 Overview
Appendix A WDT Programming A.1 Overview The TPC-1770/1780 cards’ watchdog timer can be used to monitor sys- tem software operation and take corrective action if the software fails to function after the programmed period. This section describes the opera- tion of the watchdog timer, and how to program it. -
Page 39: Watchdog Timer Programming
A.2 Watchdog Timer Programming The I/O port address of the watchdog timer is 2E(hex) and 2F(hex), 2E (hex) is the address port. 2F(hex) is the data port. You must first assign the address of register by writing address value into address port 2E(hex), then write/read data to/from the assigned register through data port 2F (hex). -
Page 40: Example Programs
; select watchdog registers ;---------------------------- al, 7 dx, 2Eh dx, al dx, 2Fh al, 0ah dx, al ;---------------------------- ; get base address ;---------------------------- al, 60h dx, 2Eh dx, al dx, 2Fh al, dx ah, al al, 61h TPC-1770/1780 User Manual... - Page 41 dx, 2Eh dx, al dx, 2Fh al, dx ; now, AX contains the base address bx, ax ; save base address in BX ;---------------------------- ; exit configuration state ;---------------------------- dx, 2Eh al, 0AAh dx, al ;---------------------------- ; select WDT pin ;---------------------------- dx, bx dx, 47h...
- Page 42 ; enter configuration state ;---------------------------- dx, 2Eh al, 55h dx, al ;---------------------------- ; select watchdog registers ;---------------------------- al, 7 dx, 2Eh dx, al dx, 2Fh al, 0ah dx, al ;---------------------------- ; get base address ;---------------------------- al, 60h TPC-1770/1780 User Manual...
- Page 43 dx, 2Eh dx, al dx, 2Fh al, dx ah, al al, 61h dx, 2Eh dx, al dx, 2Fh al, dx ; now, AX contains the base address bx, ax ; save base address in BX ;---------------------------- ; exit configuration state ;---------------------------- dx, 2Eh al, 0AAh...
- Page 44 3. Enable watchdog timer to be reset upon mouse interrupt (Note: WDT timeout value must be set before this function can work) ;---------------------------- ; enter configuration state ;---------------------------- dx, 2Eh al, 55h dx, al ;---------------------------- ; select watchdog registers ;---------------------------- al, 7 dx, 2Eh TPC-1770/1780 User Manual...
- Page 45 dx, al dx, 2Fh al, 0ah dx, al ;---------------------------- ; get base address ;---------------------------- al, 60h dx, 2Eh dx, al dx, 2Fh al, dx al, 8 al, 61h dx, 2Eh dx, al dx, 2Fh al, dx ; now, AX contains the base address bx, ax ;...
- Page 46 (Note: WDT timeout value must be set before this function can work) ;---------------------------- ; enter configuration state ;---------------------------- dx, 2Eh al, 55h dx, al ;---------------------------- ; select watchdog registers ;---------------------------- al, 7 dx, 2Eh dx, al dx, 2Fh al, 0ah dx, al ;---------------------------- ; get base address TPC-1770/1780 User Manual...
- Page 47 ;---------------------------- al, 60h dx, 2Eh dx, al dx, 2Fh al, dx al, 8 al, 61h dx, 2Eh dx, al dx, 2Fh al, dx ; now, AX contains the base address bx, ax ; save base address in BX ;---------------------------- ; exit configuration state ;---------------------------- dx, 2Eh al, 0AAh...
- Page 48 55h dx, al ;---------------------------- ; select watchdog registers ;---------------------------- al, 7 dx, 2Eh dx, al dx, 2Fh al, 0ah dx, al ;---------------------------- ; get base address ;---------------------------- al, 60h dx, 2Eh dx, al dx, 2Fh al, dx TPC-1770/1780 User Manual...
- Page 49 al, 8 al, 61h dx, 2Eh dx, al dx, 2Fh al, dx ; now, AX contains the base address bx, ax ; save base address in BX ;---------------------------- ; exit configuration state ;---------------------------- dx, 2Eh al, 0AAh dx, al ;---------------------------- ;...
- Page 50 TPC-1770/1780 User Manual...
- Page 51 HDD Kit Assembly...
-
Page 52: Appendix B Hdd Kit Assembly
Please follow the assembly procedure to install the HDD into the system. Remove the rear HDD cover. Figure B.1: Removing the Rear HDD Cover Deassemble the HDD kit from the system. Figure B.2: Removing the Top Screws TPC-1770/1780 User Manual... -
Page 53: Figure B.3:Installing The Hdd
Put the HDD into the HDD bracket and fasten the screws.. Figure B.3: Installing the HDD Paste the Mylar (from assembly box) Figure B.4: Pasting the Mylar Appendix B... -
Page 54: Figure B.5:Attaching The Hdd
5. Put the HDD to the system and fasten the screws. Figure B.5: Attaching the HDD 6. Re-attach the rear cover and fasten the screws. The HDD has been installed successfully. TPC-1770/1780 User Manual... - Page 55 Fuse Specifications...
-
Page 56: Appendix C Fuse Specifications
Step 2: Replace the damaged fuse with a new one Step 3: Place the fuse cover back in position Figure C.1: Fuse Replacement Warning Do NOT replace the fuse unless it is damaged. Do NOT replace the fuse with a different rating. TPC-1770/1780 User Manual...