Multi-touch panel computer with amd dual-core processor (54 pages)
Summary of Contents for Advantech TPC-1250H
Page 1
User Manual TPC-1250H/1550H/ 1750H Industrial Touch Panel ® Computers with Intel Atom™ Processors...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Multiple OS In addition to the OS support of Windows XP, Advantech offers platform support for WES7 and Windows XP embedded. The optional Windows CE operating system, specifically for Industrial Touch Panel Computers is also available.
Touchscreen ITO maybe crash duo to heavy usage . Power Input Voltage: 18 - 28 V , 18 - 32 V (TPC-1750H) Note! The fuse will become an open circuit if the input level exceeds 29 V Typical: 24 V @ 1.54 Amp TPC-1250H/1550H/1750H User Manual...
Insert the screws into every clamp and fasten them. These screws will push the mounting panel and fix the unit. The suggested mounting panel thickness is less than 6 mm (0.236”). Figure 1.2 Panel Mounting TPC-1250H/1550H/1750H User Manual...
1550H: 383 x 307 x 58.1 mm (15.08" x 12.09" x 2.29") – 1750H: 413.7 x 347.2 x 63.8 (16.28" x 13.68" x 2.5") Cutout: – TPC-1250H: 302.5 x 228.5 mm – TPC-1550H: 374.5 x 298.5 mm – TPC-1750H: 399.5 x 333 Figure 1.3 TPC-1250H Dimensions...
You can easily get TPC started by following the below steps. Unpack the TPC package. Check the packing list at the beginning of this manual to make sure all items have been included. Figure 2.1 Unpack the Package TPC-1250H/1550H/1750H User Manual...
CompactFlash memory is hot swappa- ble. Connect the power connector to the 24 V power lines. The power lines can either be of some power adapter or in-house power source. Figure 2.3 Power Connector and Power Lines TPC-1250H/1550H/1750H User Manual...
Note! The drivers and utilities used for the TPC-1250H, TPC-1550H and TPC- 1750H panel PCs are subject to change without notice. If in doubt, check Advantech's website or contact our application engineers for the latest information regarding drivers and utilities.
Page 21
Chapter Features in Windows XP Embedded...
Advantech provides a pair of utilities to operate EWF, OSLock andOSUnLock. Please refer the training slide in the folder, file name is “Advantech XPe Add-one.pdf”. HORM HORM stands for Hibernate Once Resume Many. In HORM environment, a single hibernation file is used to boot the system repeatedly.
Jumper and DIP Switch Settings \ A.1.1 Component Construction A.1.1.1 EAMB-1120 Top side A.1.1.2 EAMB-1120 Bottom side TPC-1250H/1550H/1750H User Manual...
Page 25
OFF (Pin 4) ON (Pin 5) Default Settings 800*600 1020*768 1280*1024 640*480 (18bit) (18bit) (18bit) (18bit) Connect to GOI pin PWM 2kHz PWM 2kHz PWM 2kHz PWM 2kHz TPC-650 TPC-1250 TPC-1550 TPC-1750 GPI_LCDSEL0 GPI_LCDSEL1 GPI_LCDSEL2 GPI_LCDSEL3 State TPC-1250H/1550H/1750H User Manual...
Page 26
ON (Pin 6) LVDS_MODE_CFG Select 6 or 8 bits LVDS input OFF (Pin 4) ON (Pin 5) CHS-04TB(2) <Characteristic> TPC-1250 TPC-650 Default State Default State LVDS_V_CFG LVDS_H_CFG LVDS_SC_CFG LVDS_MODE_CFG TPC-1550 TPC-1750 Default State Default State LVDS_V_CFG LVDS_H_CFG LVDS_SC_CFG LVDS_MODE_CFG TPC-1250H/1550H/1750H User Manual...
Page 27
This switch is used to select Termination Resistor (120 ohm) for Description long distance transmission or device matching. Default Bit1 & Bit2 (ISO_COM2_DATA+ & ISO_COM2_RX-) ISO_COM2_DATA+ Pin 1 ISO_COM2_RX- Pin 2 ISO_COM2_R_RX+ Pin 3 ISO_COM2_R_DATA- Pin 4 Default SW 4 CHS-02TB(20) TPC-1250H/1550H/1750H User Manual...
Page 28
The serial port CN13 on the TPC-650 1250 1550 1750 is adjust- Description able. It can be set to RS-232, RS-422 or RS-485. This port is designed with auto data flow control capability. Default RS232 Mode RS485 Mode RS422 Mode TPC-1250H/1550H/1750H User Manual...