Step 4: Connect to a Device and Configure Network Settings
Connecting to or Disconnecting from Devices
Configuring the IP Network Settings Automatically or Manually
Document 800-07067 Rev C
11/10
HCD5MIH/X 720p True Day/Night Network Box Camera Reference Guide
When you log on to the IP Utility, the devices on the network — including the devices on
other subnets — are automatically discovered and are listed in the Discovery pane. After
the initial discovery, auto-refresh continues to discover devices that are newly added to the
network.
You can also manually refresh the device discovery by clicking the Discovery icon (
located near the top of the Discovery pane.
Before configuring the IP network settings, you must connect to an IP device.
Connecting to a Device
You can connect to individual Web-Client applications for each discovered device.
•
In the Discovery pane, double-click the device to which you want to connect.
-OR-
•
Select the device and click the Connect
The network settings for the connected device are displayed in the System pane.
Disconnecting from a Device
In the Discovery pane, select the device and click Disconnect
Note
If you disconnect the device without saving configuration details, a warning
dialog box displays. Click Yes to save and disconnect, or click Cancel to
discard the changes and disconnect the device.
Note
When you see the Limited/No connectivity
connect to the device because the discovered device is on a different subnet
from your PC. Check your network settings for both the device and your PC to
resolve this issue. Consult your network administrator for additional support.
button.
.
button, you cannot fully
),
31