Table of Contents
Advertisement
How to Configure ISG Policy Templates
session, it provisions a template of the policy through the system only once and references the template after
that to apply the policy on each target session. Enabling policy templates in the ISG does not impact session
SSO.
How to Configure ISG Policy Templates
By default, the ISG policy templates are disabled. The platform subscriber template command enables the
ISG policy templates.
The platform subscriber template command does not take effect until the router is reloaded. For example,
Note
if this command is entered at the configuration prompt, policy templating remains disabled until the router
is reloaded. Similarly, if templating is enabled, the router has to be reloaded after the no subscriber template
command is entered to disable ISG policy templating.
Additional References
Related Documents
Related Topic
Cisco IOS commands
iWAG commands
MIBs
MIB
No new or modified MIBs are supported by this
feature.
Intelligent Wireless Access Gateway Configuration Guide
62
Configuring ISG Policy Templates
Document Title
Cisco IOS Master Commands List, All Releases
Cisco IOS Intelligent Wireless Access Gateway
Command Reference
MIBs Link
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
OL-30226-03
Advertisement
Table of Contents
