Additional References - Cisco Intelligent Wireless Access Gateway Configuration Manual

Additional References

is implemented on access points or hotspots, from which only one or few PMIPv6 subscribers can be attached.
Cisco high-end routing platforms, such as the Cisco ASR 1000 Series Route Processor 2, the Cisco ASR 1000
Series 40-Gbps ESP, and the Cisco ASR 1000 Series 100-Gbps ESP support 128,000 scaling for the LMA.
To support 128,000 scaling, configure the following on the LMA:
ipv6 mobile pmipv6-lma LMA1 domain D1
bce maximum 128000
Additional References
Related Documents
Related Topic
Cisco IOS commands
iWAG commands
MIBs
MIB
No new or modified MIBs are supported by this
feature.
Technical Assistance
Description
The Cisco Support website provides extensive online
resources, including documentation and tools for
troubleshooting and resolving technical issues with
Cisco products and technologies.
To receive security and technical information about
your products, you can subscribe to various services,
such as the Product Alert Tool (accessed from Field
Notices), the Cisco Technical Services Newsletter,
and Really Simple Syndication (RSS) Feeds.
Access to most tools on the Cisco Support website
requires a Cisco.com user ID and password.
Intelligent Wireless Access Gateway Configuration Guide
34
Document Title
Cisco IOS Master Commands List, All Releases
Cisco IOS Intelligent Wireless Access Gateway
Command Reference
MIBs Link
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
Link
http://www.cisco.com/cisco/web/support/index.html
Multiple-Flow Tunnel
OL-30226-03