Cisco Intelligent Wireless Access Gateway Configuration Manual page 19

Overview of the Intelligent Wireless Access Gateway
SUMMARY STEPS
1. enable
2. configure terminal
3. ip dhcp excluded-address [vrf vrf-name] ip-address
4. ip dhcp pool pool-name
5. network network-number [ mask [secondary] | /prefix-length [secondary]
6. default-router ip-address [last-ip-address]
7. domain-name domain
8. lease {days [hours [ minutes ]] | infinite}
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3 ip dhcp excluded-address [vrf vrf-name] ip-address
Example:
Router(config)# ip dhcp excluded-address
192.168.10.1
Step 4 ip dhcp pool pool-name
Example:
Router(config)# ip dhcp pool test
Step 5
network network-number [ mask [secondary] |
/prefix-length [secondary]
Example:
Router(dhcp-config)# network 192.168.0.0
255.255.0.0
Step 6 default-router ip-address [last-ip-address]
Example:
Router(dhcp-config)# default-router
192.168.10.1
OL-30226-03
Configuring the iWAG for 3G Mobile IP Users
Purpose
Enables the privileged EXEC mode.
Enter your password, if prompted.
Enters the global configuration mode.
Specifies the IP address that a DHCP server should not assign
to DHCP clients.
Configures a DHCP address pool on a DHCP server and enters
the DHCP pool configuration mode.
Configures the network number and mask for a DHCP address
pool primary subnet or DHCP address pool secondary subnet on
a Cisco IOS DHCP server.
Specifies the default router list for a DHCP client.
Intelligent Wireless Access Gateway Configuration Guide
11