Cisco Intelligent Wireless Access Gateway Configuration Manual page 22

Configuring the iWAG for 3G Mobile IP Users
Command or Action
Step 9
[ priority ] class type traffic { class-map-name | default {in-out |
input | output}}
Example:
Router(config-service-policymap)# class type traffic
default in-out
Step 10 drop
Example:
Router(config-service-policymap)# drop
Step 11 policy-map type control policy-map-name
Example:
Router(config)# policy-map type control BB_PROFILE
Step 12 class type control control-class-name | always}
[event{access-reject | account-logoff | account-logon |
acct-notification | credit-exhausted | dummy-event | quota-depleted
| radius-timeout | service-failed | service-start | service-stop |
session-default-service | session-restart | session-service-found |
session-start | timed-policy-expiry}]
Example:
Router (config-control-policymap)# class type control
always event session-start
Step 13 action-number service-policy type service [unapply] [aaa list
list-name ] { name service-name | identifier
{authenticated-domain | authenticated-username | dnis | nas-port
| tunnel-name | unauthenticated-domain |
unauthenticated-username }}
Example:
Router(config-control-policymap-class-control)# 10
service-policy type service name OPENGARDEN_SERVICE
Step 14 action-number authorize[aaa{list-name | list { list-name |
default}} [password password]] [upon network-service-found
{continue | stop}] [use method authorization-type] identifier
identifier-type [plus identifier-type]
Example:
Router(config-control-policymap-class-control)# 20
authorize aaa list ISG_PROXY_LIST password cisco
identifier mac-address
Intelligent Wireless Access Gateway Configuration Guide
14
Overview of the Intelligent Wireless Access Gateway
Purpose
Creates or modifies a traffic class map that is used
for matching packets to a specified Cisco ISG
traffic class.
Configures a Cisco ISG to discard packets
belonging to the default traffic class.
Creates or modifies a control policy map that
defines a Cisco ISG control policy.
Specifies a control class for which actions can be
configured in a Cisco ISG control policy.
Activates a Cisco ISG service.
Initiates a request for authorization based on a
specified identifier in a Cisco ISG control policy.
OL-30226-03