2N Helios IP Configuration Manual page 71

Server name
Set the server address to which e-mails shall be sent.
Server port
Set the SMTP server port. The default value is 25. Modifications are possible for
other values than the default one.
Login
Enter the user name for SMTP login. If authorisation is required, this field must
include a valid name. If not, this field may be blank.
Password
Enter the password for SMTP server login authorisation.
User certificate
Specify the user certificate and private key to be used for encryption of
communication between the HTTP server in 2N
user side. Choose one of the three user certificate and private key sets available;
refer to the Certificates subsection for details. You can use SelfSigned option to
use automatically generated self-signed certificate which is created on the first
start-up of the device.
E-Mail Settings
Sender's e-mail
Enter the sender's e-mail address to be included in the messages sent by
®
2N Helios IP.
Default e-mail
In the case of a missed call, 2N
address included in the telephone directory. If the telephone directory field is
blank, the message is sent to the default address included here. If this field is
blank too, no e-mail is sent.
Deliver in
Set how long 2N
server.
Send email on
Enable e-mail sending in the event of no response or every call.
E-Mail Content Settings
Attach pictures
Set whether the 2N
message.
Number of pictures
Set the count of pictures to be taken during ringing and sent enclosed to the
missed call message.
®
Helios IP sends a message to the user e-mail
®
Helios IP should try to deliver an e-mail to an inaccessible SMTP
®
Helios IP camera pictures shall be attached to the e-mail
Configuration
®
Helios IP and web browser on the
2.3
71