2N Helios IP Configuration Manual page 24

buttons on the extending. For the other positions use the numeric keypad if available
®
in your 2N Helios IP.
General Settings
Position enabled
Here select whether the selected telephone directory position shall be enabled or
disabled. Remember to enable a position to call to its number.
Position name
Enter the name of the person to be assigned to a selected telephone directory
position. This parameter is optional and helps you search the telephone directory
more easily.
E-mail
Enter the e-mail address of the user to which information on missed calls should
be sent. Refer to the E-Mail subsection for details.
Telephone Numbers
Here define up to three telephone numbers to be called one after another when a
quick dialling button or keypad is used.
Numbers 1,2 and 3
Enter the telephone number to which the call is to be routed. If the call is not
answered by the station with the telephone number specified under Number 1, it
will be forwarded automatically to the telephone number specified under Number
2 and so on.
®
2N Helios IP also allows for direct calling in the format sip:user_id@domain:port,
e.g.: sip:200@192.168.22.15:5062 or sip:name@yourcompany.
Time profile
Assign a time profile to a telephone number for validity management. Refer to the
Profiles subsection for details on time profile settings.
Station name
Set the address of the PC to which a special UDP message on the current call to the
user telephone number shall be sent. This message is used by the 2N
application for retrieving the camera image window, which is helpful to the users
that are not equipped with a display video telephone. Enter the following:
ip_address[:port1][:port2]. The port1 and port2 parameters are optional and are
used when there is Network Address Translation (NAT) between the PC and
®
2N Helios IP and the addresses have to be set in accordance with the router or
another NAT providing device. The port1 parameter (default value 8002) sets the
destination port for the UDP messages sent to 2N
parameter (default value 80) sets the destination port for HTTP communication
®
between 2N Helios Eye and 2N
camera-equipped 2N
®
Helios IP. This function is only available in
®
Helios IP models.
Configuration
®
Helios Eye
®
Helios Eye. The port2
2.3
24