Elo TouchSystems C-series User Manual page 36

Feature
Current draw – idle mode
Current draw – suspend mode
Image resolution
Image color
Scan capture size
Image capture speed
USB type
Operating temperature
Electrostatic discharge (ESD)
Part number
Testing the FPR
1. Double-click the Fingerprint Reader Test icon to start the test application.
2. Place your finger on the fingerprint reader sensor and verify that the image of
your fingerprint is displayed on the application window.
Specification
140 mA (typical)
1.5 mA (typical)
512 dpi
8-bit gray level
14.6mm (nominal width) x 18.1mm (nominal length)
100 ms
1.0, 1.1, or 2.0
0 to 40°C
Up to 15kV mounted in case
E375206
C-S T
ERIES OUCHCOMPUTER
U G 31
SER UIDE