QUORION QMP 3000 User Manual page 54

400 – DIRECT TRANSACTION TEST
1. Turn Lock to P (also X or Z when allowed)
2. Enter the number of transaction on the X key if not entered then 10 transactions is
default
3. Enter 400 on the TYPE key
4. The register will use the REGISTER number as CLERK and SALESPERSON
number when programmed else it will use CLERK 1 and SALESPERSON 1.
5. The register will now make a sale of 10 articles. The articles used depend on the
register number. It will use article 1 to 10 and add the REGISTER x 10. So on
register 1 it will use article 11 to 20.
6. The transaction is closed on TENDER 1.
7. Finished
401 – TABLE TRANSACTION TEST
1. Turn Lock to P (also X or Z when allowed)
2. Enter the number of transactions on the X key if not entered then 10 transactions is
default
3. Enter 401 on the TYPE key
4. The register will use the REGISTER number as CLERK and SALESPERSON
number when programmed else it will use CLERK 1 and SALESPERSON 1.
5. The register will use the REGISTER number as TABLE number when programmed
else TABLE 1 is used.
6. The register will now make a sale of 10 articles. The articles used depend on the
register number. It will use article 1 to 10 and add the REGISTER x 10. So on
register 1 it will use article 11 to 20.
7. The transaction is closed on PB FUNCTION 1 (Close Balance)
8. Finished
402 – DIRECT TRANSACTION TEST
1. Turn Lock to P (also X or Z when allowed)
2. Enter the number of transaction on the X key if not entered then 10 transactions is
default
3. Enter 402 on the TYPE key
4. The register will use CLERK 1 and SALESPERSON 1.
5. The register will now make a sale of 10 articles. It will use article 1 to 10.
6. The transaction is closed on TENDER 1.
7. Finished
403 – TABLE TRANSACTION TEST
1. Turn Lock to P (also X or Z when allowed)
2. Enter the number of transactions on the X key if not entered then 10 transactions is
default
3. Enter 403 on the TYPE key
4. The register will use CLERK 1 and SALESPERSON 1.
5. The register will use TABLE 1.
6. The register will now make a sale of 10 articles. It will use article 1 to 10
7. The transaction is closed on PB FUNCTION 1 (Close Balance)
8. Finished
54