cut the paper here
9.1.2 Installing and Replacing of Ribbon Cassette
9.2 Thermal printer
To remove a paper roll, cut as shown
and feed out the off-cut with the
respective "PAPER FEED" Key.
Warning:
circumstance pull the paper while
still printing.
damaged.
Repeat these steps for the second
printer station when applicable.
1. Lift up and remove the printer cover.
2. Fit the left side clip of the ribbon cassette into
its receptacle of the cassette holder and
press down on the cassette for a proper fit.
To remove a used ribbon cassette push it to
the left and lift it out.
3. Reinstall the printer cover.
Cutter
Printer
45
Do
not
under
Printer may be
any