Using Condiments - QUORION QMP 3000 User Manual

6.4 Using Condiments

CONFIGURING THE SYSTEM USING QPROG
Before you can use condiment selection you must activate the condiment table file and
condiment selection option in the configuration of the application program. As an example
the system will be setup for maximum 16 condiment tables selection on PLU level. PLU #
1 will be programmed as STEAK and for compulsory selection of Condiment Table# 1 and
2. Table# 1 will be used for prompting RAW, MEDIUM, WELL DONE and Table# 2 will be
used for FRENCH FRIES, BOILED POTATOES, BAKED POTATOES. This example can
be used on a 2 line or 8 line display the only difference is the number of condiments shown
on the display. Note that on the 2 line display the Condiment Table name is not shown.
1 – CONFIGURE CONDIMENT TABLES FILE
Open: QPROG->CONFIG->CONDIMENT TABLE
Set number of condiment tables to 16. (The maximum number which can be used
for prompting is 32).
Set the name length to 16 (This name is shown on the display when the table is
displayed).
Set number of condiments in a table to 7 (On the multiline display maximum 7
condiments are displayed in one screen but it is possible to use more then 1
screen).
Confirm by pressing OK
2 – CONFIGURE PLU FILE FOR CONDIMENT PROMPTING
Open: QPROG->CONFIG->PLU FILE
Set Condiment Selection to 16. (The max. number of tables for prompting is 32).
Confirm by pressing OK
3 – CONFIGURE MODIFIER FILE
Open: QPROG->CONFIG->MODIFIER FILE
Set the number of Modifiers to 50.
Set the name length to 16.
Confirm by pressing OK
4 – PROGAM MODIFIERS USED IN CONDIMENT TABLES
Open: QPROG->FILES->MODIFIERS
Program Modifier# 1: RAW
Program Modifier# 2: MEDIUM
Program Modifier# 3: WELL DONE
Program Modifier# 11: FRENCH FRIES
Program Modifier# 12: BOILED POTATOES
Program Modifier# 13: BAKED POTATOES
5 – PROGRAM CONDIMENT TABLE# 1 and 2
Open: QPROG->FILES->CONDIMENT TABLES
Select Condiment Table# 1
Enter Name PREPARATION
Set OPTION 1-1, Compulsory Selection
Click on LIST Column
Enter Key code 4001, 4002 and 4003 for Modifier 1, 2 and 3.
Select Condiment Table# 2
Enter Name POTATOES
Set OPTION 1-1, Compulsory Selection
31