Correcting The Last Entry; Voiding Items During A Sale - QUORION QMP 3000 User Manual

3.2 Correcting the Last Entry

The Error Correct Key (EC) is responsible for voiding the
last item that the user rang up in a sale. This is normally
the item that appears on the display. An error correct
can only be used in a sale and can only void the last
item. To void other items, refer to Voiding Items during
a Sale.
EC

3.3 Voiding Items during a Sale

Voiding refers to the removal of certain items from a
sale, usually because of an incorrect entry. The majority
of users have their cash registers programmed in such a
way that only the managers are able to correct such
entries. Managers have to physically enter a key into
the control lock and turn it to the (M)anager position
before any voids can be done (See Chapter 1.3). This
also includes any other negative transactions, such as
discounts and pay-outs.
To void an item in the R position of the lock while under
manager supervision, press the Void Key first and then
the item to be voided.
Example: To void department 1 with an amount of $2.50.
Void
Example: To void a PLU with a barcode 60050779.
Void
To void an item under the managers supervision first turn the key lock to the (M)anager
position. Then proceed with the void as explained above.
2 5
60050779
19
2 Cola 2,20
Error Correction
2 Cola -2,20
---------------------------------
Total
2 Dept1 2,50
Void Item
1 Dept1 -2,50
----------------------------------
1 Total
Cash
Your Receipt Thank You
1
0
PLU
4,40
-4,40
0,00
5,00
-2,50
2,50
2,50